how to enable turbo boost on hp envy 17 laptop i7 6700hq

If the C States are working properly, try increasing the PP0 Current Limit to 100. It would be very unusual for a laptop manufacturer to deliberately disable the C states and not provide any options in the bios to turn them back on. If your maximum multiplier is being limited to 40 during the TS Bench 1 Thread test, it is usually because the C states are disabled. As my screenshot above shows, modern Intel CPUs typically have the cores spending close to 99% of their time in core C7. If you have a lean system without a lot of background clutter, you might get pretty close to 45 during this test.Ĭlick to expand.Where is a screenshot of the ThrottleStop C State window? When your computer is idle, non-K CPUs have to be able to go into either core C3, C6 or C7. There are always hundreds of Windows tasks running in the background, waking up additional cores so you will never see the full 45 multiplier for any length of time. You should see a high multiplier during this test. The Disable and Lock feature will help to keep these at their recommended values and will prevent Windows or other software from making any unwanted changes.Ĭlose as many apps as possible and only have ThrottleStop open on the desktop. These can both be adjusted in ThrottleStop. The turbo boost short power max should be higher still. For maximum performance you need this up over 60 Watts.

Your XTU screenshot shows that the Turbo Boost Power Max is set to 20 Watts. In the FIVR section, I recommend installing the necessary driver and using the Disable and Lock Turbo Power Limits feature. Having these all set to 45 will be ignored by the CPU. When 6 cores are active, 40 is the maximum multiplier. If you are using ThrottleStop, the Turbo Ratio Limits should be set to 45, 44, 43, 42, 41, 40 from top to bottom.

This is not a K CPU so it does not support all core turbo.

How to enable turbo boost on hp envy 17 laptop i7 6700hq